SLTS0814 Fiber synchronous chip sealer can load and spread three materials at the same time, which can effectively save the construction cost and improve the efficiency. Bitumen, aggregate, fiber are commonly used materials in the road construction , and they can play a very good effect when combined with each other. But when spreading these materials, three equipments are usually needed, which will increase the cost and is not convenient to manage.
| ![]() | ![]() | ![]() | ![]() |
Model | SLTS0505 | SLTS0610 | SLTS0812 | SLTS0814 (Fiber type) |
Chassis | FAW 4*2 | HOWO/SHACMAN 6*4 | HOWO/SHACMAN 8*4 | HOWO/SHACMAN 8*4 |
Aggregate bin volume | 5m3 | 10-12m3 | 12-14m3 | 12-14m3 |
Bitumen tank volume | 5m3 | 6m3 | 8m3 | 8m3 |
Aggregate diameter | 3-25mm | 3-25mm | 3-25mm | 3-25mm |
Paving width | 200-3800mm | 200-3800mm | 200-3800mm | 200-4000mm |
Amount of bitumen spread | 0.2-3kg/m2 | 0.2-3kg/m2 | 0.2-3kg/m2 | 0.2-3kg/m2 |
Amount of aggregate spread | 2-22L/m2 | 2-22L/m2 | 2-22L/m2 | 2-22L/m2 |
Bitumen heating rate | ≥20℃/h | ≥20℃/h | ≥20℃/h | ≥20℃/h |
Best construction speed | 3-6km/h | 3-6km/h | 3-6km/h | 3-6km/h |
Fiber cut length | — | — | — | 30(mm)、60(mm)、120(mm) |
Fiber spreading amount | — | — | — | 30~90(g/m2) |
Dimensions | 8160*2550*3550(mm) | 10220×2550×3850(mm) | 11950×2500×3950(mm) | 12000*2550*4000mm |
1. Main vehicle chassis
The main vehicle adopts Sinotruk HOWO 380/400hp mountain special dump chassis, with strong load capacity and especially adapted to the plateau construction work.
2. Bitument spreading system
Adopt 2 sets of Riello burner heating, high heating efficiency, short standby time. Adopt Belgium Johnson bitumen pump, high temperature and high pressure resistance, stable and reliable performance.
3. Stone chip spreading system
The stone chip spreading system is made up of lifting and double spiral fabricator, with more uniform aggregate spreading.
4.Fiber spreading system
Fiber spreading system adopts modular design, which is more convenient for quick installation, disassembly and maintenance.
5. Auxiliary power system
Equipped with independent Cummins auxiliary engine and imported hydraulic system for higher and more stable construction accuracy.
6. Accurate control
Equipped with dual control of cab automatic control and rear manual operation and HD camera. The nozzle can be controlled separately to adjust the spreading width, and the vehicle can be sprayed when it starts.
SLTS0814 Fiber Synchronous Chip Sealer: SLTS0814 Fiber synchronous chip sealer can load and spread three materials …
SLTS0812 Synchronous Chip Sealer: SLTS0812 synchronous chip sealer is to synchronize bitumen sprinkling and aggreg…
SLTS0505 Synchronous Chip Sealer: SLTS0505 Synchronous Chip Sealer is an upgraded model based on our existing deve…
SLTS0610 Synchronous Chip Sealer: SLTS0610 Synchronous Chip Sealer is an upgraded model based on our existing deve…